ESI Reference Number

0

Vehicles and Applications

Tip Adapter for HPT 500

ESI Reference Number

0

Vehicles and Applications

Heavy-duty scan tool for Class 4 - 8 vehicles. Read, diagnose and clear HD standard trouble codes. A brilliant color display shows code descriptions and definitions, graphs live data MIDS/PIDS and can record and playback data streams. Quick Test pulls Global OBD II codes for data analysis and diagnosis. Meets SAE standards for HD J1587 / J1708 and J1939 CAN and includes engine, transmission and ABS coverage. 

Works on 12V and 24V systems to cover most medium- and heavy-duty vehicles in North America. Internet updateable for new and expanded vehicle coverage. Ideal as a shop's second tool or as a portable, on-truck diagnostic tool for field repairs. Includes 16-pin J1962, 9-pin Deutsch and 6-pin Deutsch cables. 

 

ESI Reference Number

0

Vehicles and Applications

The BAT 135 battery tester with integrated printer tests 6V and 12V batteries from 40 - 2,000 CCA including AGM, Gel cell, flooded lead-acid, start/stop EFB and Commercial SLI batteries using a micro-load test for proven, accurate results. It will also test 12V and 24V charging systems with a diode/ripple test. The integrated printer captures test results for customer records, presenting state of health and state of charge percentage. Test clamps are detachable for service or replacement.

ESI Reference Number

0

Vehicles and Applications

9 Pin Deutsch replacement cable for Bosch HDS 250 scan tool.

ESI Reference Number

0

Vehicles and Applications

J1962 replacement cable for Bosch HDS 250 scan tool.

ESI Reference Number

0

Vehicles and Applications

J1962 cable that is required in order to fully communicate with some medium duty trucks that are equipped with Caterpillar engines and BOTH a 9-Pin Deutsch and a 16-Pin J1962 connector.

ESI Reference Number

0

Vehicles and Applications

BOSCH HPT 500 HIGH PRESSURE LEAK TESTER
A cost-effective, safe alternative that will change standard practices for heavy duty preventive maintenance and repair

The Problem with Diagnosing Intake and Exhaust Leaks
Excessive DPF maintenance is often caused by upstream component faults. Troublesome intake and exhaust leaks are commonly diagnosed with outdated and inefficient equipment and methods. These methods are time consuming, dirty, and frequently result in replacement of the wrong components. Low pressure testers, soapy water, and supersonic listening devices can cause revenue generating trucks to spend unnecessary days in the repair facility, out of service.

The Solution
Bosch is addressing these problems with a new, cost-effective, and safe alternative that will change standard practices for heavy duty preventive maintenance and repair. The HPT 500 uses regular compressed air to reach and maintain a variable pressure of 2 to 20 psi throughout the vehicle’s intake and exhaust system. Compressed air mixed with a visual vapor is forced into the system, simulating the load of a running engine: both naturally aspirated and forced induction (turbo and supercharged). Many upstream leaks will only appear under these boosted pressures. The dense, highly visible vapor flows throughout the truck’s hoses, tubes and related components and escapes anywhere there is a leak, pinpointing the exact location of the problem. Retest after repair to confirm the vehicle is fixed right the first time, eliminating comebacks and cutting parts costs.

Abilities

• Produces leak detection "smoke" at higher pressure than standard machines (up to 20psi) for higher pressure systems
• Higher flow rate fills the system with smoke up to 5 times faster
• Ideal for finding leaks in exhaust after-treatment systems
• Test entire system, from intake to exhaust, in one 15 minute test
• High-pressure and large volume systems found in heavy-duty truck and turbocharged passenger vehicles

ESI Reference Number

0

Vehicles and Applications

Accessory kit for HPT 500 Smoke Machine for medium- and heavy-duty applications. The kit includes two smoke adapters, halogen inspection light and 12V DC cable to test and diagnose more vehicles. With the DC power cable you can test on the road or away from the shop to get the truck back up and running. Also included in the rugged plastic storage case are two bottles of vapor producing fluid, adapters for temperature sensor port, o2 sensor port, cooling system and pressure sensor port. Adding HPK 200 to your HPT 500 heavy-duty smoke machine enables you to test, diagnose and fix more vehicles. 

ESI Reference Number

0

Vehicles and Applications

6 Pin Deutsch replacement cable for Bosch HDS 250 scan tool.

ESI Reference Number

0

Vehicles and Applications

The BAT 120 is a wireless battery and starting/charging system tester used with the Bosch ADS 325 and ADS 625 diagnostic tools. The BAT 120 sends data directly to an app pre-installed on the Bosch ADS tools, saving time and putting more vehicle diagnostic information on the scan tool